Spello_1005

Spello 1005S

Spello 1005S: Satellite DVB-S/S2-MPEG4 SD

Feature
STi5211CHKC:450MHz ST40-300,dual-issue,applications CPU
DVBS2 + H.264 MPEG4 STB
2D graphics rendering engine
NDS CAS and HDI MW
Nagra CAS Ready

System
Main Chip: STi5211CHKC
CPU: 450MHz ST40-300,dual-issue,applications CPU
Flash Memory: 8MB BGA SPI Flash
RAM Memory: 128MB DDR2-800

DVB-S Front End
Input frequency: 950 MHz to 2175 MHz
Input Level: -65 to -25 dBm
Symbol Rate: QPSK 1-52.5 Msps
Demodulation: QPSK
DVB standard: DVB-S

Video
Decode: H.264 MP@L3,HP@L3;MPEG-1,MPEG-2
MP@ML;BC1MP@ML,AP@L1 Video decoder
– Support 4:3,16:9 aspect ratios
– Support 720×576 full D1

Audio
Supported decoding:
Compression: MPEG-1 Layer I/II, Mpeg-2 Layer II,MPEG-2 AAC LC, MPEG-4 AAC+ HE (V1 &V2)– PCM mixing with internal or external source with sample rate conversion(32,44.1,48kHz)

Rear Panel
RF Connector:
1x F type Female(Sat RF/LNB input)
Video Output: 1 x RCA for CVBS
Audio output: 2 x RCA for Audio L/R
DC input: 1 x DC JACK

Front Panel
KEY Button : 7 x Key buttons
LED: 3 x led
IR receiver: 1 x IR receiver
Smartcard slot: 1 x Smartcard slot

External power Adaptor
AC input: 100~240V AC, 50/60Hz
DC output: 12V DC+/-5%, 1.5A
Efficiency: 80% Min. @ Full Load