Spello_1000

Spello 1000S

Spello 1000S: Satellite SD MPEG2

Feature
SIP3L+(CX2448X) LIBRA CPU
SD STB (DVB-S)
MPEG-II,330 MIPS ARM926
Fully integrated Audio and (x6) Video DACs
Uses SIP Technology (CPU+Memories in same package) allowing :
2 layer low cost PCB
reliability in manufacturing and easy to move in local manufacturing sites
Both Nagra and NDS Certified
Running different MW : NDS HDI, Novabase MW for LatAm
Dolby Digital Audio decoding solution,2D
Full EPG : graphics rendering engine

System
Main Chip: Trident Libra 280/330 MIPS ARM926
Flash Memory: Embedded 8MB NOR flash
RAM Memory: 32MB DDR-400

DVB-S Front End
Input frequency: 950 MHz to 2175 MHz frequency range
Input Level: -70 dBm to -15 dBm at 75(normal mode)
Symbol Rate: 1 MBd to 45 MBd
Demodulation: QPSK
DVB standard: DVB-S

Video
Decode: MPEG-2
Resolution: 720×480@30fps NTSC
720×576@25fps PAL
Support Format: MPEG-2 MP@ML/MP@LL/SP@ML

Audio
Supported decoding:
MPEG-1/MPEG-2 layer I and II
Dolby Digital

Rear Panel
RF Connector:
1 x F type Port for tuner input;
1 x F Type Port for loop through
Video Output: 1 x RCA
Audio output: 2 x RCA
DC input: 1 x DC JACK

Front Panel
KEY Button : 8 x key buttons (power, menu, volume up/down,channel up/down,ok, Go back)
LED: 3 x led (Red, Green: Stand by; Green: mail;Yellow: Remote Control)
IR receiver: 1 x IR receiver
Smartcard slot: 1 x Smartcard slot

External power Adaptor
AC input: 100~240V AC, 50/60Hz
DC output: 12V DC+/-5%, 1.2A
Efficiency: 80% Min. @ Full Load